|
General
Description : |
|
|
|
|
The
pendulum Impact Tester Model IT 30 is
designed for conducting izod, Charpy test. The test methods confirm to
BS : 131 : part 4-1972 (amended 15 Aug.
1993)
BSEN : 10045-2 : 1993 & ASTM :
E-23-94a. |
|
|
|
The Pendulum is mounted on antifriction
bearings. It has two starting positions,
the upper one for Charpy & the lower
one for izod testing. On release, the
pendulum swings down to brake the
specimen and the energy absorbed in
doing so is measured as the difference
between the height of drop before
rupture and the height of rise after
rupture of the test specimen and is read
from the maximum pointer position on the
dial scale. (It is read on digital readout in case
of electronic machines.) |
|
|
|
There are two strikers and one combined
support available for lifting in to the
pendulum and on to the base of the
machine for Izod., Charpy test, Changing
from one striker to another is achieved
simply by fixing the new striker into
it's position. |
|
|
|
|
|
|
|
|
|
|
CHARPY
TEST : |
|
|
|
The charpy test piece rests on alloy
support anvils, fitted on the base of
the machine rigidly held in position by
Allen screws. End stopper is provided
for quickly and accurately locating the
test piece centrally between the
supports. |
|
|
|
IZOD TEST : |
|
|
|
The Izod test is clamped vertically
in Izod support fitted on the base of
the machine. The support is provided
with a machined vertical groove to suit
the test piece size. The front clamp
piece and the Allen screw enable
clamping of the test piece in correct
height with the help of Izod setting
gauge supplied. |
|
|
|
|
|
|
|
|
|
|
CHARPY
TEST : |
|
|
|
This impact tester offered with 300J
energy exclusively for Charpy test
confirming to ASTM- E-23. This machine
is geometrically checked in the works to
the more stringent requirements of the
American standard. The accuracy of the
machine is then verified by PROOF TEST
by testing standard test specimens
supplied the NIST, USA. All two sets of
the five specimen must agree with the
normal values within certain tolerance
specified. |
|
|
|
|
|
|
|
|
|
|
|
|
MODEL |
IT-30 |
IT-30D |
IT-30
(ASTM)
Charpy Test |
IT-1.5 |
IT-0.5 |
Maximum
capacity |
300J/168J |
300J/170J |
300J |
15J |
5J |
Minimum
Scale
Graduation |
2J |
0.5J |
2J |
0.1J |
0.05J |
Overall
Size (Approx.) |
1.1m
x 0.45
m x 1.65 m (H) |
1.32m
x 0.45 m x 1.05 m (H) |
1.4m
x 0.5 m x 1.9 m (H) |
0.5m
x 0.3 m x 0.52 m (H) |
0.5m
x 0.3 m x 0.52 m (H) |
Net
Weight (Approx. ) |
375
kg |
375
kg |
450
kg |
70
kg |
70
kg |
|
|
|
|
OPTIONAL ACCESSORIES FOR IT 30 /
IT 30 D : |
|
|
|
|
Caliper gauge for
checking V notch for Izod & Charpy. |
|
|
|
Templates for checking
10 x 10 mm cross section of Izod /
Charpy test specimen. |
|
|
|
Depth notch gauge
including V & U notch gauges for
checking depth blow V/U notch, angle and radius. |
|
|
|
Izod support for 0.450
dia Izod round specimen. |
|
|
|
Self centering tong
for quick and accurate setting of Charpy
test specimen. |
|
|
|
'V' notch milling
cutter |
|
|
|
'U' notch milling
cutter |
|