|
Technical Description : |
|
|
|
FIE Universal Testing Series Unitek 9700 are microprocessor based Electromechanical machines with Servo drive designed for testing & Studying mechanical behavior of various materials like metals, polymers Etc. These machines offer good built-in features to offer excellent stand Alone performance for standard tests & great flexibility for complex Analysis. These machines confirm to IS, BS & ASTM standards.
|
|
|
|
Main Features |
|
|
|
|
Servo drive with lead screw gives an gives an advanced drive system with 1 to 1000 standard speed range. |
|
|
|
Computerised Microprocessor based Instrumentation to measure display & store load & Displacement values. |
|
|
|
Provision for load cell interchangeability & thereby automatic selection of lad full scale. |
|
|
|
Speed selection through selector switch in steps or variable speed selector through potentiometer. |
|
|
|
Facility for mounting different load cells & clamping devices to suit different tests & materials such as thin wires, metalsheets, fiberglass, leathers, springs, cardboards etc. |
|
|
|
Built in parallel interface to connect printer for data & curve print-out. |
|
|
|
Safety interlock for overhead & limit switch sensing to ensure protection test. |
|
|
|
Universal applications in R & D, education, quality control & production for test like tensile, compression, bending etc. |
|
|
|
|
Electronic Control
Panel (Series TNE – 9700) :
|
|
|
|
|
The electronic control panel is built using 8085 microprocessor which incorporates sate of the art technology with following features. |
|
|
|
Front panel membrane type key board for test setup. |
|
|
|
7 seg digital display of load & displacement / extension. |
|
|
|
Printer port for printer / plotter interface. |
|
|
|
Optional series port for communication with PC / AT etc. |
|
|
|
Optional add on facility for electronic extensometer. |
|
|
|
Storage on important parameters such as peak load, displacement at preload & maximum displacement after test. |
|
|
|
Selection of test type like tension, compression, or cyclic by key board. |
|
|
|
Preload selection ( 0.01 to 1 % ) by thumbwheel to take care of initial slippage. |
|
|
|
Selection of stop or return crosshead after test. |
|
|
|
|
OPTIONAL ACCESSORIES : |
|
|
|
|
FIE offers a wide range of optional accessories along with unitek 9700 Machines to cover almost
every material test requirement. |
|
|
|
|
|
|
Loaded Cells |
|
|
|
|
FIE offers Strain gauges type Universal load cells in different capacities in the following nominal ranges: |
|
|
|
100N, 250N, 1kN, 1.2kN. Load cells of different capacity can be offered as per customers requirements. |
|
|
|
|
Grip & Clamping
Device |
|
|
|
|
A wide range of grips are available from FIE such as : |
|
|
|
Vise type grips. |
|
|
|
Single thread grips. |
|
|
|
Compression Plates. |
|
|
|
Bending Fixtures. |
|
|
|
Shearing Attachments. |
|
|
|
|
Extenso meters : |
|
|
|
Electronic analog extensometers are offered along with interface card on the control panel to measure extension with a resolution of 1 micron. |
|
|
|
|
Model : EE - STRAIN GAUGE |
|
|
|
|
|
|
SERIAL COMMUNICATION INTERFACE & SOFTWARE PACKAGE ON PC/AT |
|
|
|
|
For complex test analysis the Unitek 9700 series machines can be offered with and optional serial port to establish communication with PC. The TNE – 9700 series control panel can be hooked to any PC/AT etc., using RS-232 communication port which is offered as optional. FIE offers different exhaustive application software package on PC to enable the user to effectively different parameters. |
|
|
|
The features include : |
|
|
|
User friendly main menu with popup/pulldown menus, prompt message & on line help. |
|
|
|
Extensive graphics on screen for curve plotting, magnification & zooming. |
|
|
|
Advanced fine handling for data save recall with database creation |
|
|
|
Printout option for Reports, Data, Graph etc. |
|
|
|
|
The software package available are: |
|
|
|
|
1) Basic Evaluation 2) Exhausitive Evaluation 3) Rubber Textile 4) Compression shear & bending.
5) Spring Testing. |
|
|
|
Statistical Evaluation software can be offered for all these program as optional. FIE also can provide custom built software solution to suit customer requirement. |
|
|
|
|
SPECIFICATION : |
|
|
|
MODEL NO. |
UNITEK 9701 |
UNITEK 97025 |
UNITS |
Load range |
0-1 |
0-2.5 |
kN |
Load resolution |
1 st range:
0 - 40% of F.S. |
1 / 10000 of nominal load cell connected. |
1 / 10000 of nominal load cell connected. |
- |
2 st range:
0 - 100% of F.S. |
1 / 4000 of nominal load cell connected. |
1 / 4000 of nominal load cell connected. |
- |
Load Measuring accuracy |
+/-1% from 2% to 100% of nominal load of loadcell used. |
+/- 1% from 2% to 100% of nominal load of loadcell used. |
- |
Max. Crosshead Stoke |
800 ( Without grips & load cell ) |
800 ( Without grips & load cell ) |
mm |
Crosshead Displacement measurement |
0.1 |
0.1 |
mm |
Crosshead speed range |
0.5-500 |
0.5-500 |
mm/min |
power upply |
230 VAC, 50 Hz Single Phase |
230 VAC, 50 Hz Single Phase |
- |
|
|
|
|
SPECIAL OPTIONS |
|
|
|
|
Load full scale of 20,000 or 50,000 counts |
|
|
|
Crosshead displacement resolution of 0.01 mm. |
|
|
|
|
NOTE |
|
|
|
The power requirement of each model depends on the speed range and the capacity of the machine. |
|
|
|
|
Due to constant R & D Specifications & Features are subject to change without notice. |
|